Ability to project a profile to an element from a superelevation lane.

There are many circumstances where the same Deck Template point needs to be Point Controlled onto multiple linear features. Currently the user needs to either create multiple decks/support lines or create Geometry that traces the original and join...

Add a separate limiting tension stress for the top of girders near interior supports. AASHTO LRFD permits the use of a limiting tension stress at the top of girders near interior supports for Service III different than the limiting tension stress ...

The Florida I-Beam (FIB) section library in LEAP Concrete has not been updated to reflect the latest standard revisions. In particular, the number of strand slots in the third row from the bottom (@ 7") is shown as 13 in LEAP, while the current st...

Can the Overhead conduits be set to apply "sag " curves for models in 3D? which means, we will need to include vertical curves when placing them between 2 nodes (eg. poles); In a real world, the conduits typically have some sag, and not as straigh...

The Canadian code in Leap concrete is outdated. It needs to be updated to the most recent version

Useful to see the prestressing strands from the design products (LEAP & RM) back in OBM

Currently OBM requires atleast two beams in the beam layout. Users working on bridge expansion projects, or with rail bridges have requested allowing bridges with a single beam.

Similar to the custom tools for available for stiffeners and cross frames for steel built up or rolled shape beams, OBM needs to add tools for adding these to steel tub/U beams

At the moment, you run Place Node, then set the type of node by picking a feature definition. However, you normally know what type of node that you want to place, such as a manhole for example,so it would be more intuitive if the ribbon contained ...