When making alignment modifications by manipulating tangents (Horizontal Alignments) or gradients (Vertical Alignment) we prefer to limit extents of changes to only one tangent / gradient at a time. This is possible, when alignments are built with...

Long alignments can oftentimes consist of multiple profiles that control along various segments of the alignment. Currently, only one "Active" profile can be assigned to an alignment. When creating multiple bridges along the same alignment, users ...

An input report should be made available to LARS files similar to the input report generated in LEAP Steel. This allows for a more efficient process for QA/QC of load rating files. This ability was present in LARS v10, but removed in the modernize...

When using the “New Point” command for a survey point, the user must screen-pick the coordinates. There are times when it would be extremely useful to hand-enter the Northing, Easting, Elevation.

MnDOT wants to start using wider 3-digit sizes (22.5"x18", 30"x24" & 45"x36") for some of the county shields within the Minnesota standard in OpenRoads SignCAD. The wider 3-digit sizes are needed for the M1-6M and M1-6a blue pentagon county sh...

Hello. We're building a tunnel and need OpenTunnel to be able to compare the actual data from the constructed tunnel (recorded via scanning) with the theoretical data from the designed tunnel corridor. There are other programs that do this: Istram...

Currently we can not annotate the grade difference on the profile parabola, We can use the Item types to build a expression to calculate the grade difference and then use the civil labeler, but this workflow works only if the profile is not comple...

Need the ability to see wall symbology but not centerline. If the centerline symbology is set to construction class so are the inside/outside walls and they don't print. If the centerline is set to 255 the inside/outside walls do display in print ...

Right now it seems cutting XS sheets always finds meshes in the 3D model, but it won't find 3D Linear Elements. I can use Linear Templates to make sure everything gets found, but it'd be nice to have a toggle/option when placing the Named Boundaries.

When Drawing a Custom Linestyle in a Profile view. The linestyle is scaled with the vertical exaggeration. This makes the linestyle unreadable, and therefore cannot have custom linestyles in profile view unless re-drawn in the drawing model, which...