In Geopak Drainage, once you place a node and attached a catchment, you were able to see inlet calculations. This let the user know if they needed to shift the box to have an allowable spread. It would be great if we could get that feedback withou...

Geopak is no longer supported by Bentley. At some point, Geopak will not be installed on our machines, but we may need to get the calculations that reside in the GDF file. We need a method that will allow us to extract the information we need from...

Beam haunches should have more robust parameters or even model templates. some examples would be: the ability to allow exterior haunches to extend to the edge of deck independent of the top flange of the girder/beam. also allow it to taper to a ...

Multiple options should be available (node handles that can be manipulated, a match slope to conduit option in properties, a degree value that can be keyed-in, etc). This should allow for simplified placement of cell nodes that serve as pipe fitti...

Using OpenRail 2024 Vertical Frame Text significantly increases the height of Cross Sections, THUS causing more sheets. Would like the capability to have Horizontal Text in a frame, one row for Offset, one for Elevation. While this can be done, wh...

There can be a lot of instances on a project where a detail in a section is not practical to model 3D, and the user feels compelled draw the element live in the drawing model. It would be great to capture live elements with annotation groups, as t...

💡 Problem in Bentley Templates In Bentley software, defining dependencies between points requires creating a very large number of individual points. This makes templates complex, cluttered, and difficult to edit, since every relationship must be r...

To enhance productivity and efficiency in live projects, we need dynamic Named Boundaries linked to Geometry. This includes the ability to update the shape or location of a named boundary after creating a sheet model, with the changes reflected in...

Our bridges are designed with a haunched (or angled) soffit at the outside edges of the deck. These extend from the outside edge of the deck down to the top of the outside girder flange. Right now, this can be fudged in a deck template on a straig...

Trench templates are used on pipes for fill quantities. It would be useful if you could place a trench that would automatically assign parametric constraints based on the size and pipe thickness of the pipes. Also, shapes other than a circle are d...