Need Support? Let’s guide you to the right answer or agent.

OpenBridge Ideas Portal

ADD A NEW IDEA

My ideas: Applications

Showing 1484 of 1646

Add Elevation Mode "3D Element" as an option when placing points

We need to have the ability to place points by snapping to 3D elements (ORD Geometry & Regular Microstation Linework) This is how we give set out points to contractors for grading work. The only way to do this currently, is to choose Elevation...
almost 2 years ago in OpenRail Designer / OpenRoads Designer / OpenSite Designer 0 Future consideration

Support for LEAP

I would like to see an upgrade and continued support for LEAP Bridge Concrete and LEAP Bridge Steel. Most recent updates I have seen are from 2020 and with the ever increasing demand for Model Based Design it will be imperative to upgrade and prov...
almost 2 years ago in OpenBridge Designer 0 Already exists

Improved Interoperability Between OBM > LBC/LBS

I would like to see an improvement to the interoperability - Once you "Send To [LEAP]" the bridge model from OBM you are no longer able to modify the bridge in OBM and UPDATE the existing .lbcx file you are working in. I understand that significan...
almost 2 years ago in Import/Export / OpenBridge Modeler 0 Already exists

Add Trailing Zeros Setting to Point Station

Need the ability to hide ".00" decimal for stationing using the trailing zeros setting. For example, station 100+00.00 would label 100+00. This is available for point offset and I've attached a screenshot of the settings needed.
11 months ago in Annotation / OpenRoads Designer / OpenSite Designer 3 Future consideration

Design Footing with sides that are parallel to the column sides

Some tight geometric conditions require a this scenario
almost 2 years ago in OpenBridge Designer 0 Future consideration

Ability for Corridor Horizontal Parametric Constraints to be applied with Reverse Cubic Curves

In our legacy software we could quickly and easily apply a reverse cubic curve tapers for our designs without having to create Geometry and have our lane edges follow that - noting that the Geometry is not actually the required reverse cubic curva...
almost 3 years ago in OpenRoads Designer 0 Future consideration

Ability to control the cl profile (in a template/corridor) by vector offset method from adjacent corridors on either side.

I would like to control the elevation of my centerline point (point in template) to be controlled by a "vector offset method" by selecting to points (corridor feature) in two corridors that running parallel.
11 months ago in Modeling / OpenRoads Designer 5 Already exists

Turn on/off elements in the main dgn will change on all the sheets.

It is expected to turn on and off elements in the container file and it will reflect those changes on all the profile sheet models.
almost 2 years ago in Drawing Production / OpenRail Designer / OpenRoads Designer / OpenSite Designer 0 Already exists

Create 3D by slope to terrain needs to have the option for the fill slope to be positive and vise versa for cut slope

When projecting a line to a terrain currently the only option for fill is down and cut is up. This needs to be a user selectable option. There are many cases where the proposed surface is above the existing ground yet the fill projection needs to ...
almost 2 years ago in Modeling / OpenRail Designer / OpenRoads Designer / OpenSite Designer 2 Future consideration

Store vertical/horizontal alignment of low points

A tool existed in Geopak that could pick out the low point of a cross section to the left and right of centerline and construct horizontal and vertical alignments from that. This essentially automated the creation of a ditch profile along an entir...
almost 2 years ago in Modeling / OpenRail Designer / OpenRoads Designer / OpenSite Designer 0 Future consideration