Add OpenRoads Designer Civil functions to Python integration allowing development of Python applications that can access/call the Civil Design processes within OpenRoads

We need to be able to track alignment data to check sheet annotation. Would be very helpful to have an easy way to do this in sheets. Since an alignment or terrain would still need to be selected, the sheet scale shouldn't matter. This would work ...

Add an option to get camber given at 10th points on the clbrg span instead of the precast span. beams are being set at a certain elevation at CLBRG so the camber up from CLBRG is what we need to design geometry around, not camber up from end of pr...

Currently when defining the horizontal earth loading on an abutment, the only option is to have a triangular loading from top to bottom. The "Mag2" input box (for the load magnitude at the top of the load) is set at 0, greyed out, and cannot be ed...

Currently sight distance analysis results are purely 3d extended objects that only offers a limited amount of functionality to determine visually why a failure is occurring. Adding 2d geometry representation to these objects would allow users to p...

Under commentary C2.5.2.6.2: "For straight girder system bridge, this is equivalent to saying that the distribution factor for deflection is equal to the number of lanes divided by the number of beams"

Draw Clear Zone tool in Plan/3D that reads from AASHTOW roadside design tables for offsets and slopes from the model.

The user insists of adding Str III as a default combinations. It may be useful to create a default Str III combination (since now we have WL considered under design) instead of forcing the user to create a new combination that accepts WL. Please s...

When a load is defined in LBS, it is defined corresponding to a certain construction stage. However, there is no way to change the stage after the load is defined. The user has to delete the load and redefine it in a different stage. (e.g. allow a...

Currently in the XSection viewer in OpenRoads Designer if you have a corridor or linear template that touches our butts up against another corridor you can't place temporary dimension lines on those components to make measurements if the linear or...