If a drainage profile uses a cached view rather than a dynamic one, ORD will provide a notification in the bottom right-hand corner that simply says "Cached References are currently displayed. One or more cached references does not match the curre...

Currently in ORD existing cant can only either be viewed graphically in the curvature diagram or from within the cant editor. Current workflows to annotate existing cant in profile require the projection of both left and right rails in the vertica...

When working on Finish Grade Elevations, I have been utilizing the Station / Offset Tool in the OBM Geometry Report flow to capture my T-line points along Beam Lines and print the report for documentation. The bridge I am currently working on is o...

The current version of LBC we're using references the Manual for Bridge Evaluation, 2nd Edition as the basis for bridge rating. I'm wondering if there are plans to update this to reference the 3rd Edition instead. If such an update is planned, cou...

In OBM, when using the "Modeled as sloped bearing seats" option, I expected the bearing seat to slope longitudinally as well—not just transversely. This is especially relevant for precast bearings, which often consist of a variable grout pad and a...

I'm currently developing a bridge model that includes a gore area, and I'm encountering some modeling challenges. The main issue is with the deck slope: the slope direction changes across the width of the bridge, but the deck template is constrain...

In modeling a gore area, I need the slope direction to follow an auxiliary alignment. However, when using corridor information from OpenRoads Designer (ORD), it becomes incompatible with OpenBridge Modeler (OBM) if there's a change in slope direct...

For final bridge plans involving a steel bridge, we need to report dead load deflections at either the 10th or 20th points along the span—from bearing to bearing. While the program does calculate these points, it currently measures them from the e...

Need new Barrier Feature definition separated for Deck & Approach Slab.

Currently, Civil Labeler is limited to ORD Geometry/Elements etc. but sometimes we have regular linework drawn as basic MicroStation smartlines in which we need to call out Coordinates and Elevations. Civil Labeler should have the ability to do this.