Currently, LEAP Concrete reports required interface shear reinforcement values for both a smooth and a roughened condition. It also flags a design as not passing if either minimum is not met. If I know I have a roughened girder, I should be able t...

Currently the Description Separator is in the Survey Settings. Description Separator and Attribute Separator should be in the TIW. (Text import wizard). I will like a prompt to set the Description Separator just before you import a file.

Existing Center Line is critical information. We must be able to create such a line in an easy way without having to apply workaround, 3/4 steps workflow or MDL.It means H+V+existing cantIn the past we had a single box to check to create this exis...

Need to be able to dimension Surface templ ates in the dynamic cross section view during design as well as XS Drawing Models for plans productions. Could do it in InRoads.

In 10.11 R1 (10.11.00.115), the profile projection icon under the OpenRoads Model tab changes when the projection’s source reference file is detached. Once you detach the reference the profile projection loses its civil rule, thus the icon changes...

If a user changes a linear feature code, the expectation would be to also see the feature codes on the points that make up that linear feature change accordingly (if the linear feature was dependent on these points features and the appropriate lin...

Currently sight distance analysis results are purely 3d extended objects that only offers a limited amount of functionality to determine visually why a failure is occurring. Adding 2d geometry representation to these objects would allow users to p...

The Graphics tool (Survey >> Field Book >> Import) currently imports all the MicroStation features in the active .dgn to survey features. This idea is a request to enhance the Graphics tool (Survey >> Field Book >> Import) ...

Our industry requires to provide accurate horizontal alignment's annotation which shows element's length between turnouts (not only length of whole plan elements). This is what could be done by "Switch Height Plan" tool in Power Rail Track (PRT). ...

This label should function similar to the analyze point and analyze between points that are already available but we need to be able to control the display of the output for sheeting.