We use a federated workflow where our geometry is in separate files, and each corridor is in a single file. We also use the left-center-right modeling concept where pavement corridors are in separate files from grading/end condition files. In this...

A standard Pier type used in our state typically calls out two lengths of pile ('Long' and Short') that alternate along the width of the Substructure. An example plan is attached. If the ' Embed Length ' variable had a manual override option to ch...

Provide an option or new method to use the centerline radius (instead of inside lane radius) for divided highways that use a Crown pivot method. The Divided Inside pivot method already does this for divided highways that pivot about the inside lan...

Users should be allowed rename the Bearing group names and the individual bearings in a group.

When geometry is created using the Horizontal Offset Tools, if the geometry is controlled using Civil Accudraw snaps this is not reflected in the Properties Tab for start and end points. This makes adjusting the Civil Accudraw snaps difficult, suc...

If I have annotation for curves in a track alignment and annotation for a turnout that does not annotate any curves, there is no way to deal with a single complex alignment and the annotation associated with it. As soon as I complex a turnout with...

Ability to annotate the reverse point of a reverse transition.

Current Beam hog modeling is not as expected for Australian Bridges. Deck thickening can be applied, but the beams that support the deck do not follow the underside shape of the deck. The beams are straight, but really need to be curved and follow...

We need better access and configuration for this constant. There is no place to set this constant.

Up to now the rails of the turnout can be created in 3D as 3D rails, but the turnout has many other elements, above all the sleepers are divided and all have different dimensions. How could this be created as 3D elements?