We have a client need to streamline the process to annotate the horizontal geometry on the profile. The need is to call out the curve compensation that is calculated at horizontal curves and displayed with a dimension line. As well adding in the h...

With regular MicroStation lines, when using the "move parallel" tool (Offset), there is an option to choose "Round" which creates rounded corners for the offset line. There should be a similar option when using the ORD Tool "Offsets and Tapers." C...

There are tens of thousands of barrier inlets on barrier medians throughout the US. Spread needs to be calculated on both sides, with the overall flow being added to the storm sewer system. Currently, the only way to do this is to create to halves...

In the Superelevation Editor, being able to add a point of reverse curvature on reverse parabolic transitions will help when trying to manually define/adjust points of 0% cross slope.

In the Superelevation Editor, adding a "crown removed" option to the Point Type list would help when trying to manually define/adjust anywhere there is 0% cross slope.

Currently the lengths given by the Table editor gives Chord defined curves as Arc defined lengths. So the length and the stationing are off.

In order for the place bearing tool to work for as many instances as possible, we either need to be able to adjust the bearing's vertical location due to shim plate placement on an individual basis or else allow for different cells to be used at t...

When zooming out, the points are shown. When zooming in, the points are hidden and the text is shown. I'd like for the point to always be shown and have the text be dynamic.

Ability to flip/reverse cross sections around baseline. Currently, when you reverse section, it does not hold station 0.

This comment is coupled with another idea I had regarding selective update of annotations. Again the problem stems directly from the dynamic nature of ORD. Usually the process to create a cant for an alignment goes as follows: -Creation of speed t...