In Geopak, we had the ability to take individual alignments and create an overall alignment from a subset of alignments and it would hold the individual stationing for each alignment, creating station equations. There is no way to do this in ORD u...

Currently this option is only available for Linear features. This means any text annotated through Point annotation groups can't be moved or rotated, which is a problem for our Right of Way points. Sometimes we have 100+ Right of Way points that r...

Whenever you have a Geometry and used shared line (e.g. Lots), There should be a tool to remove duplicate/overlapping lines. Its problematic if we use a special linestyle with gaps and when the two line on top of each other it will look like a sol...

LFD design code is used in superstructure rehabilitation projects for bridges that are originally designed with LFD. Please consider making it an option in LEAP Steel similar to LEAP concrete.

It would be nice to be able to export a drainage network into 2D linework that can be edited for plan sheets. Currently, we don't use our modeled files directly in our plan sheets as we cannot adjust the conduit line styles and it takes longer to ...

I would like Geometry Points to support using parametric cells.

What I envision, would be the ability to define Math within a Text Favorite. So, let us say that "[[" would define the start of math in a text favorite. A text favorite could be created in that the value displayed, is math from element properties....

I would like the ability to control the limits of the profile run in profile sheets which would also allow me to control the stationing without having to create a separate alignment and project the drainage run into the separate alignment.

My state agency commonly uses gutters with a 4% cross slope. The maximum superelevation rate is 7%. The gutter slope stays at 4% in this situation. Spread does not compute in this scenario because "A depressed gutter must have a Gutter Cross Slope...

When creating parcels in Geometry Builder, I would like the option to have it automatically add COGO/Geometry Points at the PIs and on-alignment points as I place the elements.